LF series - flexible rod
2015-01-19 979
Product Feature：
LF series flexible rod type magnetostrictive displacement sensor, suitable for measuring the large travel and replace the cramped use occasion.Products using the flexible rod can realize linear displacement measurement, can also realize the curve of displacement measurement, compared with the rigid rod products, LF series products reduced the replacement installation required space, also reduced the difficulty of transportation.
Strong anti-jamming capability, allowable WenYu wide, never wear.Optional output signals include: analog, SSI (synchronous serial interface), etc.
| Analog Output | SSI Output | |
|---|---|---|
| Project Name | Standard/Parameter | Standard/Parameter |
| Measurement Range | 500-10000mm | 500-10000mm |
| Output Signal | 0~20mA,4~20mA; 0~10V,-10V~+10V | 24,25,26 bit binary system or Gray code |
| Resolution | 16 bit D/A | 2/ 5/ 10/ 20/ 50/100um |
| Non-linearity | ＜±0.02％F.S.(min±100μm) | ＜±0.02％F.S.(min±80μm) |
| Repeatability | ＜±0.001％F.S.(min±1μm) | ＜±0.001％F.S.(min±1 readings) |
| Response Frequency | Related to the range | Related to the range |
| Operating Voltage | 24VDC （-15/+20%） | |
| Working Temp | - 40℃～+85℃ | |
| Protective Ability |
Without IP30 when protecting tube, after loading, electronic parts：IP67， Rod pressure：35MPa continuous/70MPa peak |
|
| Way To Install | Sensors for two M4X59 screws, between ontology and rod rod built-in installation, M18X1. 5 screw | |
Boundary Dimension:
| Sensor ontology |
|---|
 |
| Pipe covering |
|---|
 |
| The circular is commonly used | ||
|---|---|---|
 |
 |
 |
| OD33 magnet ring | OD25.4 magnet ring | OD17.4 magnet ring |
| thickness of the 8mm | thickness of the 8mm | thickness of the 8mm |
| Analog Output | Needle Size | Line Color | Definition | SSI Output | Needle Size | Line Color | Definition |
|---|---|---|---|---|---|---|---|
 |
1 | grey | Output Signal：0-20mA，0-10V |
 |
1 | grey | （-）data |
| 2 | pink | Signal earth | 2 | pink | （+） data | ||
| 3 | yellow | （+）communication interface | 3 | yellow | （+） clock | ||
| 4 | green | （-）communication interface | 4 | green | （-） clock | ||
| 5 | palm | +24VDC（±10%） | 5 | palm | +24VDC（±10%） | ||
| 6 | white | communication interface | 6 | white | communication interface | ||
| 7 | 不接 |
| Analog Output | Needle Size | Line Color | Definition | Modbus Output | Needle Size | Line Color | Definition |
|---|---|---|---|---|---|---|---|
 |
1 | grey | Output Signal：4-20mA，0-10V |
 |
1 | grey | A（RS485） |
| 2 | pink | Signal earth | 2 | pink | B（RS485） | ||
| 3 | palm | +24VDC（±10%） | 3 | palm | +24VDC（±10%） | ||
| 4 | white | communication interface | 4 | white | communication interface |
| Analog Output | Indicator state | Definition |
|---|---|---|
 |
Green light | Regular work |
| Green light flashing | Programme state | |
| Red light flashing | The circular leave effective range | |
| Red light | Detect the circular or damage |
| SSI Output | Indicator state | Definition |
|---|---|---|
 |
Green light | Regular work |
| Green light flashing | Programme state | |
| Red light flashing | The circular leave effective range | |
| Red light | Detect the circular or damage |
